DESCRIPTION:

A rapid setting radiopaque Zinc Oxide / Eugenol resin bonded Material. This product is ideal for sensitive activity, good thermal and chemical insulation. It is a strong base for amalgam

condensation and higher initial resistance to fracture due to resin bonding.

INDICATIONS FOR USE:

Used for lining under non-resin filling materials.

Used as a temporary filling material and cement.

Used as a temporary seal.

DIRECTIONS FOR USE:

Place the required amounts of powder and liquid a short distance apart on a clean, smooth glass slab.

Using a suitable spatula, progressively incorporate portions of powder into the liquid, spatulating thoroughly after each addition, until a cohesive consistency is reached.

Mixing time: 1-1½ minutes (according to the size of mix).

Place sufficient of the mix in to the dried cavity and gently pat into position: to prevent the

instrument sticking during this placement, periodically dip the end of the instrument into the

surplus dry powder on the mixing slab, or use a small pellet of cotton wool dampened in water and hold in a pair of pointed tweezers.

DPI Kalzinol is hydraulic, and moisture seepage or saliva will not affect its hardening.

The toughness and adhesive quality of the set DPI Kalzinol provides for easy and smooth carving with a sharp cutting instrument.

When sufficiently hardened-approximately 3 minutes after placement-the margins should be

cleared and the cavity dried. The final restoration may then be inserted.

 PACK SIZE:DPI Kalzinol

 Composite pack of 20g powder and 10ml liquid                                 MRP- Rs 300